When redecorating or re-designing a house, you will have a necessity to switch a wall panel or set up new panels of MDF (medium-density fibreboard).
In our article, we’re going to cowl a step-by-step course of for panel a wall with MDF simply and rapidly.
#What You’ll Want
For panelling a wall with MDF, you’ll want the next:
MDF panels
Noticed
Tape measure
Sander
Screws
Energy drill
Paint (non-obligatory, for design functions)
Step Ladder
Decorator’s caulk
Sandpaper
Step One: Take Measurements
Step one in including or changing MDF panelling in your wall is taking the suitable measurements. To measure your wall:
Use your tape measure to first measure the size of your wall. Make sure you take two measurements and confirm the wall size right down to the millimetre.
Arrange your step ladder and thoroughly measure the peak of your wall to the closest millimetre. At all times take two measurements.
Notice your measurements down.
High Tip: all the time spherical up for measurements, as extra could be reduce away out of your panelling.
Step Two: Supply Your MDF Panels
MDF (or medium-density fibreboard) is a reasonably frequent wood sheet materials used for inner development. At MGM Timber, we offer all kinds of MDF panels for inner use. Make sure you choose a panel that can suit your measurements.
To learn the way many panels you’ll want, take the size and peak measurements and divide them by the panel dimensions.
For instance, in case your wall is 12 ft in size and you might be shopping for 4 ft MDF panels, divide 12 ft by 4 ft to provide you 3 – that means you’ll want three 4 ft MDF panels.
At all times guarantee that the peak of your MDF panels matches or exceeds the peak of your wall. If an MDF panel is just too large, it may be reduce to measurement.
High Tip: moisture-resistant MDF is a good alternative over customary MDF for rooms or climates which might be notably humid.
Step Three: Minimize Your Panels To Measurement
If you’ve bought your MDF, let it sit within the room it’s to be put in in for at least 48 hours earlier than working with it. That is to account for the humidity ranges within the room and to forestall any enlargement or warping from throwing off your measurements.
After the 48 hours have handed, affirm your measurements and use your noticed to chop the MDF panels to measurement. You can even use a sander for finer particulars and to easy out any tough edges.
Step 4: Set up Your Panels
Upon getting eliminated your previous panels, line up and mark the place the brand new MDF panels will likely be screwed into place in your wall frames. Use a pencil to mark on the MDF panel the place you may be screwing them into place.
You may accomplish this utilizing equal spacing between the screws and utilizing your tape measure to mark the MDF panel appropriately. Mark alongside each 300mm for a screw, and make sure you mark round 15mm from the board edges.
Now gently prop the MDF board in place and screw the board to the wall body utilizing an influence drill with a screw little bit of the suitable measurement.
For those who can not use the pre-existing holes, or don’t wish to, area the screws out alongside the size of the body the place there are not any holes current.
Lastly, utilizing the decorator’s caulk, fill any small holes or gaps. Sand the caulk after it’s dried to create a easy, seamless joint.
High Tip: all the time drill or nail right into a wall the place you recognize it’s protected to take action – don’t hit any cables or pipes!
Step 5: Embellish
With the exhausting half out of the best way, all that’s left to do is paint your new MDF board. Make sure you use wooden paint and get inventive with it!
In Abstract
Panelling a wall with MDF could seem tougher than it’s if you first think about the thought, however earlier than lengthy, you’ll be an skilled!
As a late piece of recommendation, all the time take two measurements and purchase round 10-20% extra MDF than you’ll want – that is to account for any breakage or human error.
How To Panel A Wall With MDF Simply & Shortly is a featured put up